 | GreenMech EVO205D - Category: Wood Chippers - GreenMech EVO205D - Category: Wood Chippers |
 | GreenMech ArbTrack200 - Category: Wood Chippers - GreenMech ArbTrack200 - Category: Wood Chippers |
 | Bandit SG75 - Category: Stump Grinders - Bandit SG75 - Category: Stump Grinders
2020y
980hrs |
 | Forst ST6P - Category: Wood Chippers - Forst ST6P - Category: Wood Chippers
fULLY SERVICES
2020 YEAR
420 HOURS |
 | Schliesing 175MX - Category: Wood Chippers - Schliesing 175MX - Category: Wood Chippers
fULLY SERVICED
2021 YEAR
290 HOURS |
 | GreenMech 205D EVO - Category: Wood Chippers - GreenMech 205D EVO - Category: Wood Chippers
2021 YEAR
455 HOURS
FULLY SERVICED |
 | Jensen A540 SPIDER - Category: Wood Chippers - Jensen A540 SPIDER - Category: Wood Chippers
2017 YEAR
855 HOURS
FULLY SERVICED |
 | Timberwolf 230VTR - Category: Wood Chippers - Timberwolf 230VTR - Category: Wood Chippers
FULLY SERVICED
2019 YEAR
625 HOURS |
 | Forst XR8 - Category: Wood Chippers - Forst XR8 - Category: Wood Chippers |
 | Timberwolf TW230VTRP - Category: Wood Chippers - New 2022 Timberwolf TW230VTRP Tracked Chipper
c/w. Briggs and Stratton 37hp Petrol Engine
150mm x 230mm chipping capacity
No-stress System
Twin hydraulic in-feed rollers
Variable width track base 810mm - 1210mm
2 speed tracking with ride on foot-plate
36 month Manufacturer's Warranty
Call Phil Edmondson on 07880 646067 for further details |
Forst TR8 - Category: Wood Chippers - Forst TR8 Tracked Woodchipper
Year 2019
303 Hours
45hp Kubota turbo engine
Part exchange welcome
Buy with confidence from Forest Arborcut
Email: [email protected]
Tel: 01794 389144 |
SnS Timber Grab - Category: Mini Loaders - Ex Demo SnS timber grab and rotator
Attachment plate to suit Cast, Workyquad, Avant or Multi One Mini Loaders
This has been our demo unit and as such has not been subject to major use or abuse
Requires switched 12 volt supply on loader to switch from grab to rotate.
Supplied with 30 days back to Spectrum Plant Warranty.
1,600.00 + VAT
Call Phil Edmondson on 07880 646067 for further information |
Forst ST8 - Category: Wood Chippers - 481 Hours - Forst ST8D – 8” Wheeled Woodchipper - £19,950.00 + VAT
2019 Model, 481 hours
• 8” x 10” In feed, Kubota Diesel (V1505T) 45hp Turbo engine, AutoIntelligence No Stress Device, ForstGrip Feed Roller System, Fold down hopper, Fully Water & Vibration Proof Touch Pads.
Fully refurbished machine by Forst and as new. Comes with new blades, anvils, belts and bearings. Full hydraulic and engine service. This machine can be ready to go in around 3 weeks and can be reserved with only a small deposit. Finance options are available. Sample photos used.
If you require any further information, please don’t hesitate to contact us on Tel: 01264 721790, or Email: [email protected]
|
Forst PT8 - Category: Wood Chippers - 292 Hours - Forst PT8 – 8” PTO Woodchipper - £12,850.00 + VAT
2019 Model, 292 hours
• 8” x 10” In feed, PTO drive, AutoIntelligence No Stress Device, ForstGrip Feed Roller System, Fold down hopper, Fully Water & Vibration Proof Touch Pads.
Excellent condition, very low hours, new blades and anvils fitted. Call now to reserve the machine with a small deposit. Finance options are available.
If you require any further information, please don’t hesitate to contact us on Tel: 01264 721790, or Email: [email protected]
|
Forst TR6 - Category: Wood Chippers - 733 Hours - Forst TR6 – 6” Tracked Woodchipper - £16,850.00 + VAT
2018 Model, 733 hours
• 6” x 8” In feed, Kubota Diesel 35hp (V1505) engine, AutoIntelligence No Stress Device, ForstGrip Feed Roller System, Fold down hopper, Fully Water & Vibration Proof Touch Pads, Variable tracks.
Very good tidy machine, fully serviced and with new blades and anvils fitted, Manufacturer approved. This machine can be ready to go in around 3 weeks and there are finance options available. Call now to reserve the machine with a small deposit.
If you require any further information, please don’t hesitate to contact us on Tel: 01264 721790, or Email: [email protected]
|
Forst ST6P - Category: Wood Chippers - 338 Hours - Forst ST6P – 6” Wheeled Sub 750kg Woodchipper - £12,250 + VAT
2019 Model, 338 hours
• 6” x 8” Inlet feed, Briggs Vanguard V twin EFI 37hp engine, AutoIntelligence No Stress Device, ForstGrip Feed Roller System, Fold down hopper, Fully Water & Vibration Proof Touch Pads, 750kg machine.
Excellent machine in excellent condition. This machine and can be ready in around 3 weeks and comes fully serviced and with new blades and anvils fitted, Exceptional chipping performance, Sub 750kg weight, Manufacturer approved, Call now to reserve with a small deposit, Finance options are available.
If you require any further information, please don’t hesitate to contact us on Tel: 01264 721790, or Email: [email protected]
|
Forst ST8 - Category: Wood Chippers - 359 Hours - Forst ST8D – 8” Wheeled Woodchipper - £21,850.00 + VAT
2020 Model, 359 hours
• 8” x 10” In feed, Doosan D18 Stage 5, 55hp Diesel Engine, AutoIntelligence No Stress Device, ForstGrip Feed Roller System, Fold down hopper, Fully Water & Vibration Proof Touch Pads.
Excellent condition and very tidy, Fully serviced, New blades, New anvils. This machine can be ready to go in around 2 weeks and can be reserved with only a small deposit. Stage 5 compliant, Finance options are available. Sample photos used.
If you require any further information, please don’t hesitate to contact us on Tel: 01264 721790, or Email: [email protected]
|
2019 Rayco RG25HD self propelled Stump Grinder - First in service 2020. Owned and maintained from us since new and in very good condition. Fully serviced, worn curtains replaced and new teeth fitted. £6,250 + VAT. Please call 01483 235111. |
Forst TR8 - Category: Wood Chippers - 611 Hours - Forst TR8 – 8” Tracked Woodchipper - £24,650.00 + VAT
2019 Model, 611 hours
• 8” x 10” Inlet feed, Kubota Diesel 45hp engine, AutoIntelligence No Stress Device, ForstGrip Feed Roller System, Fold down hopper, Fully Water & Vibration Proof Touch Pads, Fitted tow bar.
Fully refurbished machine and in as new condition. Fitted with new bearings, blades, anvils, and belts. Full engine and hydraulic service. All work carried out but Forst engineers and the machine comes manufacturer approved. This machine can ready to go in around 3 weeks. Call to reserve the machine with a small deposit, Finance options available. Sample photos used.
If you require any further information, please don’t hesitate to contact us on Tel: 01264 721790, or Email: [email protected]
|
Forst TR8 - Category: Wood Chippers - 783 Hours - Forst TR8 – 8” Tracked Woodchipper - £21,350.00 + VAT
2018 Model, 783 hours
• 8” x 10” Inlet feed, Kubota Diesel 45hp engine, AutoIntelligence No Stress Device, ForstGrip Feed Roller System, Fold down hopper, Fully Water & Vibration Proof Touch Pads, Fitted tow bar.
Fully refurbished machine and in as new condition. Fitted with new bearings, blades, anvils, and belts. Full engine and hydraulic service. All work carried out but Forst engineers and the machine comes manufacturer approved. This machine can ready to go in around 3 weeks. Call to reserve the machine with a small deposit, Finance options available. Sample photos used.
If you require any further information, please don’t hesitate to contact us on Tel: 01264 721790, or Email: [email protected]
|
Forst TR8 - Category: Wood Chippers - 1619 Hours - Forst TR8 – 8” Tracked Woodchipper - £16,350.00 + VAT
2017 Model, 1619 hours
• 8” x 10” Inlet feed, Kubota Diesel 45hp engine, AutoIntelligence No Stress Device, ForstGrip Feed Roller System, Fold down hopper, Fully Water & Vibration Proof Touch Pads, Fitted tow bar.
Very tidy machine and comes manufacturer approved. Fully serviced by Först and comes with new blades and anvils fitted. This machine can ready to go in around 3 weeks. Call to reserve the machine with a small deposit, Finance options available.
If you require any further information, please don’t hesitate to contact us on Tel: 01264 721790, or Email: [email protected]
|
Forst TR8 - Category: Wood Chippers - 162 Hours - Forst TR8 – 8” Tracked Woodchipper - £27,350.00 + VAT
2019 Model, 162 hours
• 8” x 10” Inlet feed, Kubota Diesel 45hp engine, AutoIntelligence No Stress Device, ForstGrip Feed Roller System, Fold down hopper, Fully Water & Vibration Proof Touch Pads, Fitted tow bar.
Very low hour machine in excellent condition and comes manufacturer approved. Fully serviced by Först and comes with new blades and anvils fitted. This machine can ready to go in around 3 weeks. Call to reserve the machine with a small deposit, Finance options available.
If you require any further information, please don’t hesitate to contact us on Tel: 01264 721790, or Email: [email protected]
|
Norcar a6226 Wheeled Miniloader - The 26hp Norcar a6226 wheeled Miniloader weighs 960kg and is essentially a versatile working machine for professional use offering high pulling force, speed and lifting power as standard. The stable extension boom allows high-lift tasks to be completed easily and safely. The lifting boom is simply and comfortably controlled using a joystick with an electric switch to control extension and auxiliary hydraulics. Equipped with dual working hydraulic pumps, the machine is well prepared for attachments requiring high oil flow. Moreover, several functions can be used simultaneously without affecting each other, which makes work more efficient.
An adjustable steering wheel and a comfortable suspension seat provides a restful ride. The drive system with a foot throttle and direction pedal allows the loader to be controlled with incredible precision, even with demanding equipment and terrain.
For more information and pricing, please visit www.miniloaders.co.uk or call Green Plant UK on 01483 235111. |
Predator P460 - Category: Stump Grinders - Predator P460 - Category: Stump Grinders
2020 model
25hp
multi tip teeth |
Jo Beau M100 - Category: Wood Chippers - Jo Beau M100 - Category: Wood Chippers
SPECIAL OFFER PRICE FEBRUARY 2023
M100 - 700 + VAT
|
Jo Beau B37-110RC - Category: Stump Grinders - Jo Beau B37-110RC - Category: Stump Grinders
If you are looking for a stump grinder withwireless remote control, theB37-110 RCis the machine for you. The radio control controls the driving and complete operation of the machine. The machine comes with a charger and extra battery for the radio and a cable for direct connection.
On the stump grinder itself there will be a 'console' where the components - necessary for the radio control - will be mounted as well as the basic controls in case the spare battery is not nearby and it is empty in the radio.
The machine is equipped with a powerful ecological EFI motor & a specially developed grinding disc 'GrinDisc, equipped with 12 Greenteeth 900-series teeth.
On the B37-110 RC the user -depending on the hardness of the stump- choses to let the grinding disc lower automatically 2,5 cm, both at the left and the right, resulting in an unexcelled working speed on a device of its category!
Here are some examples of the performance (average values):
300 mm: 3,5 min
600 mm: 9 min
1000 mm: 30 min
Jo Beau developed the'GrinDisc-grinding wheel, resulting in a bigger centrifugal force and helping the engine to gain force to maintain a stable speed.
Furthermore, the B37-110 RC is now standard equipped with theVanguard EFI two cylinder petrol engineaccording to the most recent ecological technology.EFImeans electrical petrol injection". The controlled petrol injection is coupled to the load of the engine, resulting in several advantages:
More torque, higher performance under load
More stable speed
25% less petrol consumption
Better combustion with less emission
No choke anymore
Less noise
No leaking carburettor during transportation
AllJo Beaumachines are built according to the valid European guidelines and dispose of a CE-certificate. All machines are supplied with manual and component list.
✓ Compact for transportation
✓ Hydraulic full-automatic control and self-propelled
✓ Wireless radio control
✓ 2,5 cm reduction for each tilt side
✓ EFI petrol engine
✓ GrinDisc grinding wheel
✓ Wide caterpillars for big stability
✓ Only 74 cm wide
✓ Teeth 3 x 120, can be rotated and ground again
✓ The machine is equipped with 3 lifting eyes
✓ International patent
Technical specifications
Performance
Max. working width: 1100 mm (43.30 In)
Max. grinding depth: 500 mm (19.68 In) (380mm (14.96 In) with scraperplate option)
Max. grinding height: 500 mm (19.68 In)
Control: Full-automatic - remote control
Engine
Brand & type: B&S Vanguard - 2 cyl. 4-stroke
Power: 27,6 kW (37 Hp)
Drive: Petrol engine - EFI (electric fuel injection)
Consumption: 8,9 L/h - 3600 RPM
Noise level Lw(A): 105 dB(A)
Design
Dimensions (LxWxH): 1370 x 740 x 1500 mm (53.94 x 29.13 x 59.10 In)
Weight: 610 kg (1344.82 Lbs)
Drive traction: Hydraulic > 0-1,5 km/h
Fuel supply: Removable metal jerrycan 20L
Brakes: Option
Chassis: Powder-coated steel
Grinding Technology: Jo Beau grindertechnology - 'GrinDisc
Teeth: Greenteeth 900, 12 pcs
Grindwheel diameter: 460 mm (18.11 In)
Disc transmission: Triple industrial V-belts on electromagnetic coupling
Operating mode: Remote control |
Jo Beau V460 - Category: Forestry Tools - Jo Beau V460 Scarifier - Category: Forestry Tools
The V460 pro-scarifier lawn scarifier has a knife shaft in line with the wheel shaft. In this way the V460 scarifies equally, independent of the slope of the ground. The caster wheels at the rear part ensure the necessary flexibility, stability and make turning easy. The optional wheel fixation bar can be easily assembled on the caster wheels to scarify equal strokes on lawns with slopes.
This scarifier has been tested both by professionals as in rental applications. The knife housing, made of durable steel, guarantees both the durability as the safety of the operator and the people around. Big aluminium wheels, wheel scrapers, a rubber mud flap, an ergonomic height regulation and deep changing of the knives as well as a foldable handle are some of the technical features of the V460.
The revolutionary Greenknives with a Jo Beau patent guarantee a never seen working time. By turning the knives simple a quarter stroke, the knife shaft does not need to be disassembled anymore to change the knives. The Greenknives can be supplied in fixed and lose version. The knives have been assembled in spiral to avoid a simultaneous contact with the lawn. This converts the Jo Beau V460 into a high quality and maintenance friendly scarifier.
All Jo Beau machines are made according to the valid European guidelines a CE-certificate. All machines are supplied with manual and parts list.
✓ A never seen durability of the Greenknives
✓ Choice between fixed and lose knives
✓ Very practical handling thanks to the caster wheels
✓ Ideal for slopes
✓ Big working width of 46cm
✓ Knives can be turned 4 x 90
✓ Very compact for transport
✓ Maintenance friendly
✓ Wheel scrapers above aluminium wheels
✓ Several practical options available
Working width: 460 mm (18.11 In)
Working depth: Max. 10 mm (0.39 In)
Engine Brand & type: Honda GX270 - 1 cyl. 4-stroke
Power: 4 kW (5,5 Hp)
Drive: Petrol engine
Consumption: 1,7 L/h - 3600 RPM
Noise level Lw(A): 92 dB(A)
Dimensions (LxWxH):1210 x 790 x 970 mm (44.88 x 31.10 x 40.94 In)
Weight: 59 kg (130.07 Lbs)
Chassis: Powder-coated steel
Knives: Greenknives - 4 times rotatable
Fixe knives (number / thickness): 21 / 3mm (0.12 In)
Moveable knives (number / thickness): 21 / 3mm (0.12 In)
Knife transmission:Double industrial v-belt
Foldable handlebar: Standard
Maintenance alarm / Hour counter
Wheel fixing rod |
Timberwolf 230DHB - Category: Wood Chippers - Timberwolf 230DHB - Category: Wood ChippersTimberwolf TW230DHB WoodchipperFuel - Diesel Year - 2018Hours - 89535hp EngineGood condition Serviced and sharp blades Part Exchange welcome |
TP 150 - 6" - TP 150 - 6" - PTO Woodchipper
Year 2003
6" Capacity
Fitted with No-Stress Device
Buy with confidence from Forest Arborcut
Tel: 01794 389144
Email [email protected] |
Predator P38X - Predator 38X Stump Grinder variable width track base for narrow access
Powerful Kohler 38hp petrol engine
740 hours, Year 2012 checked over and fitted with new teeth
Part exchange welcome
Buy with confidence from Forest Arborcut
Email : [email protected]
Tel: 01794 389144 |
Predator P38X - Predator 38X Stump Grinder variable width track base for narrow access
Powerful Kohler 38hp petrol engine Year 2012
634 hours, checked over and fitted with new teeth
Part exchange welcome
Buy with confidence from Forest Arborcut
Email: [email protected]
Tel: 01794 389144 |
Rayco RG13 - Category: Stump Grinders - Rayco RG13 - Stump GrinderYear 2008New EngineNew teeth fittedPart Exchange welcomeBuy with confidence from Forest Arborcut. Tel 01794 389144Email: [email protected] |
Timberwolf 230VTR - Category: Wood Chippers - WE ARE UPDATING OUR CHIPPER HIRE FLEET.
This 2018 Timberwolf TW230VTR has been on our chipper hire fleet from new and has been inspected, serviced and had sharpened blades fitted between each hire.
The current hours on this machine are 790 (may change slightly) and is a great example of a well looked after machine.
We are offering this fully serviced chipper with 2 months Back To Spectrum Plant Warranty for £18,250.00 + VAT
Please call Phil on 07880 646067 for further information |
Timberwolf 18/100G - 4" - Category: Wood Chippers - 2018 Timberwolf TW18/100G/ES Gravity Fed Chipper
18hp Briggs and Stratton Petrol Engine
4" Gravity In-feed
High speed un-braked axle and chassis with road lighting.
Supplied fully serviced with 30 days back to Spectrum Plant Warranty.
£5,600.00 NO VAT
Please call Phil Edmondson on 07880 646067 for further details. |
Jo Beau B37-110 - Category: Stump Grinders - Jo Beau B37-110 - Category: Stump Grinders
2020 machine
One owner
One years warranty
320 hrs but still in use
37hp Efi engine
Fully automatic
Grading blade
29 width
610kgs
Belt drive |
Toro STX26 tracked stump grinder - Toro STX26 tracked stump grinder in good working order
starts and runs perfectly
All bearings and motors good condition
Model - STX26
Age - 2015
Hours - 1227
|
For Hire Robocut - Category: Other - For Hire Robocut - Category: OtherFor Hire Mcconnel Robocut Robocut are compact versatile remote control bank mowers, capable of working on slopes up to 55 Degrees. Available with a flail head with either hammer or grass blades, they can provide safe working solutions to otherwise unworkable sites. With a working width of 1.3 Meters and a remote control range of over 100m you can operate the machine at a safe distance whilst still being in control. Max Gradient: 55 degrees Transmission: Hydrostatic Machine weight: 1000kg Fuel type: Diesel Hire rates: 1 Week 700 2 Weeks 1350 3 Weeks 20004 Weeks 25004 Weeks or more POA |
Bandit ZT1844 - Category: Stump Grinders - Bandit ZT1844 - Category: Stump Grinders
2017 model
One owner
Belt drive
Greenteeth
29" width
38hp Kohler |
Predator P460 - Category: Stump Grinders - Predator P460 - Category: Stump Grinders
2019 |
Ultra Plant 3-way deck screen - Category: Screening Equipment - Used Ultra Compact 3-way deck screen - Category: Screening Equipment
Ultra compact 3 way deck screen
3 phase
10mm
30mm x 60mm screens, ideal for woodchip, soil & aggregates
Trailed unit
|
Timberwolf TW PTO/100G Chipper - This is a versatile machine well-suited to estate life. With a low centre of gravity, easy tow chassis and good ground clearance this machine has a positive blade feed action and large feed funnel, as well as the ability to quickly process 75mm to 100mm (3"-4") diameter material at up to 1.5 tonnes per hour.
The PTO/100G has been designed for use by the medium to large estate and landscape gardener who has access to a compact tractor with a 6-spline 540rpm power-take-off shaft.
Ideally suited to tractors from 21hp to 35hp, it will easily tackle branches from 75mm (3") to 100mm (4") diameter, depending on tractor horsepower. The machine is fitted to a 'slow tow' chassis and does not require the use of the three point linkage.
As the best small estate wood chipper on the market, the TW PTO/100G has a full spec of excellent features and benefits:
Same unrivalled performance as the TW 18/100G
3 point linkage not required
"Positive Blade Feed" - ensures material is drawn into machine easily
Large throat area at base of feed funnel for easy loading of awkward shaped material
Blades can be sharpened up to 10 times, with up to 25 hours between sharpening
Fold up feed funnel in transport position
Low speed chassis fitted with turf tyres - idea for estate use
Light and manoeuvrable
Easy access to all serviceable parts
Towing eye fitted
Timberwolf TW PTO/100G Machine Specifications
Timberwolf TW PTO/100G Specifications
Engine
18-35hp @ PTO (540rpm)
Fuel
N/A
Tank Capacity
N/A
Weight
268kg
Length
With feed tray down 1935mm, when feed tray up 2460mm
Width
1000mm
Height
2180mm
Max Dia. Infeed
100mm (4")
Throughput
Up to 1.5 tonnes per hour
Feed method
Positive blade feed
Blades
2 x 177mm (7") fully hardened
|
Carlton SP4012 - Category: Stump Grinders - Carlton SP4012 - Category: Stump Grinders
2015 model
755hrs
Kubota 45hp turbo diesel
Radio remote
4WD
Dual wheels
Sandvik cutting wheel
Hydraulic grading blade |
GreenMech 19-28MT50D - Category: Wood Chippers - GreenMech 19-28MT50D - Category: Wood Chippers
2006 model
1300kgs
190mmx280mm aperture |
Timberwolf 280PHB 8" petrol road tow chipper - The Timberwolf TW 280PHB 8" petrol chipper is designed with the operator in mind, with an extra wide feed funnel and open top section to provide better visibility and ease of feeding. It has a wide infeed aperture (280mm x 210mm) which is bigger in overall area than the nearest rival, so big, brashy, tangled material is no problem for this machine.
- Kubota 57HP WG1605 4 Cyl. petrol engine
- 280mm x 210mm feed opening
- 2 x quick access double-sided reversible blades
- 210mm (8") cutting performance
- Quad force rollers for ultimate crushing power
- 280 (degrees) adjustable discharge
- Average chip size 19.5mm
For more details on this machine please visit https://www.greenplantuk.com/timberwolf-chippers or call 01483 235111.
|
Energreen RoboMAX - Energreen RoboMAX is a robust forestry cutter machine that can easily work in different tasks and works. The standard equipment includes two hydraulic double-effect functions.
Designed to satisfy the most different needs, Energreen RoboMAX can be defined as a multifunctional remote controlled machine, with power and performance comparable to a traditional tractor with several attachments. The main features that make the difference about this machine among all other robots are power, reliability, strenghtness, high performance and versatility and a powerful Diesel 75 Hp engine.
For more information, please visit https://www.greenplantuk.com/sales/energreen-machines/robomax/ or call Green Plant UK on 01483 235111 |
Timberwolf TW 160PH 6" Petrol Chipper - Timberwolf TW 160PH 6" Petrol Wood Chipper
- Hydraulic Road Tow Chipper
- 22 HP Honda petrol engine
- 608kg towing weight
- 2 x quick access double-sided reversible blades
- 160mm x 160mm feed opening
- 152mm (6") cutting performance
If youre just starting out as a landscaper you want a capable chipper that doesnt break the bank - or your rear axle. You want a lightweight, easy-to-manoeuvre machine that is simple to service and that can take on some serious jobs.
Its whats inside that matters.
The TW 160PH has replaced the sector leading TW125PH. The first thing you might notice is the upgraded blades, from single-sided to reversible. The machine design has been simplified making it easier for you to keep it in first-class shape. The fan paddles have gone from aluminium to steel for extra strength. There are remote greasing points and in-feed controls on both sides of the hopper. The hopper also has an open top to help you feed awkward branches. It feels familiar, but under the skin its a break from the norm.
This machine delivers more than it has any right to deliver. So light, so well designed, so powerful and such good value. Arrange a demonstration today, youll be impressed.
For pricing and more details please contact Green Plant UK on 01483 355111.
|
Timberwolf 13/75G 3" Wood Chipper - Timberwolf 13/75G 3" Wood Chipper
- Gravity Fed Chipper
- 13hp Honda 4-stroke
- Unleaded Petrol
- 188kg
- 75mm (3") infeed
- Up to 0.75 tonnes per hour throughput
Built to cope with the full range of green garden waste, this machine is the most effective and rugged 75mm (3") chipper available on the market. It is a commercial chipper, designed to work all day, every day.
Its positive blade feed draws material in and ensures an easy and safe operation. The machine also boasts a robust design and long life, which provides users with lower running costs. This model is capable of dealing with over a third of a tonne per hour, processing material quicker than the operator can load it,
For more information or pricing, please call 01483 235111 andhttps://www.greenplantuk.com/sales/timberwolf-chippers-shredders/tw-1375g/ |
Timberwolf TW 230VTR Petrol and Diesel 6" variable tracked Chippers - Timberwolf have announced petrol and diesel fully Stage V complaint for their very popular 6" variable tracked Chipper.
Timberwolf TW 230VTR Petrol Chipper
- Fully Stage V compliant
- Variable Tracked Chipper
- 37hp Briggs & Stratton Vanguard V Twin
- Petrol
- 1172Kg excluding winch
- 160mm (6.25) Infeed
- Up to 5 tonnes per hour throughput
Timberwolf TW 230VTR Diesel Chipper
- Fully Stage V compliant
- Variable Tracked Chipper
- 24.8hp Kubota V1505 4-cylinder
- Diesel
- 1285Kg excluding winch
- 160mm (6.25) Infeed
- Up to 4 tonnes per hour throughput
For more information please visit https://www.greenplantuk.com/sales/timberwolf-chippers-shredders/ or call Green Plant UK on 01483 235111 |
Timberwolf TW 230HB Diesel or Petrol 6" Chipper - Timberwolf 6" petrol or diesel road towable hydraulic wood chippers are Timberwolf's most popular ‘all round’ machines. Their versatility means they can be used effectively across a range of applications and conditions, including landscaping, tree surgery and contract work.
Timberwolf TW 230HB-Petrol Chipper
- Fully Stage V compliant
- Hydraulic Road Tow Chipper
- 37HP B&S Vanguard V Twin Engine
- Unleaded Petrol
- 695 KG
- 160mm (6.25) infeed
- Over 5 tonnes per hour throughput
Timberwolf TW 230HB-Diesel Chipper
- Fully Stage V compliant
- Hydraulic Road Tow Chipper
- 24.8hp Kubota 4 cylinder
- Diesel
- 749Kg
- 160 mm infeed
- 4 tonnes per hour throughput
For more information please visit https://www.greenplantuk.com/sales/timberwolf-chippers-shredders/ or call Green Plant UK on 01483 235111.
|
For Hire - Walk Behind, Self Propelled and Tracked Rayco Stump grinders - Green Plant has one of the largest hire fleets of Rayco Push Behind, Self propelled and tracked Stump Grinders in the UK and we believe that our hire fleet is one of the best, if not the best, maintained fleet in the business. All our machines are always fully serviced (including teeth sharpening) prior to going out on hire and we offer a full backup service in the unlikely event that something does occur. All machines in our fleet can be hired for a day, a week, a month or even longer at very competitive pricing.
Please call us on 0845 2600 119 or 01483 235111 for a quote. |
Norcar 755xc Wheeled Miniloader - Norcars smallest wheeled miniloader, the 755xc, is an adaptable and versatile machine for the private user, but also withstands tough professional jobs. With its tight turning radius and compact construction, it is very efficient in confined spaces.
The 755xc has high traction in relation to its weight. The drivetrain is hydrostatic and is controlled by a direction pedal.
Available with a wide range of groundcare, agricultural, property maintenance and industrial attachments.
For more information and pricing, please visit www.miniloaders.co.uk or call Green Plant UK on 01483 235111
|
Energreen RoboGreen evo with Flail for hire - Energreen's RoboGREEN evo is a 40hp remote-controlled grass cutting machine with the power and performance comparable to a classic grass cutting arm for a tractor.
It can work on slopes of up to 55 degrees and can be remotely controlled from up to 150m away.
The Flail cutting head attachment can cut grass and shrubs up to 3cm in diameter.
Cutting width: 130 cm
Pressure: 290 bar
Hydraulic Motor: 21cc
Weight of the machine and attachment -= 1200kg.
For more details and to hire this machine, please call Green Plant UK on 01483 235111. |
Timberwolf TW PTO/150H Chipper - Having been designed for the larger estate and a busy landscape gardener, this chipper fits onto any compact tractor that has a 6-spline 540rpm power-take-off shaft, category 1, three point linkage and 12 volt electric supply.
Unlike some PTO chippers, this chipper is completely self-contained with the Timberwolf Auto Feed Control and its own hydraulic oil tank (chippers without self-containted hydraulic system may not be compatible with a tractor). The TW PTO/150H is ideally suited to tractors from 25hp to 60hp.
This chipper will easily tackle branches from 125mm (5") to 150mm (6") depending on tractor horsepower.
This chipper is ideal for attached to a tractor and its features and benefits include:
Blades - easy to access and change, do not require shimming, can be sharpened up to 10 times with up to 25 hours chipping between sharpening
Clever rotor and blade design allows compact size that makes more efficient use of engine power compared to competitors
Legendary Timberwolf no stress control - fast reaction times ensure high efficiency, high throughput and constant discharge velocity
Independent hydraulic system to power the feed rollers is self contained. Does not rely on the tractors hydraulic supply. This makes it truly versatile and does not rely on being compatible with the tractors hydraulic system
Timberwolf TW PTO/100G Machine Specifications
Timberwolf TW PTO/100G Specifications
Engine
25-60hp @ PTO (540rpm)
Fuel
N/A
Tank Capacity
N/A
Weight
400kg
Length
Feed tray up 1775mm, feed tray down 2880mm
Width
1110mm
Height
2165mm
Max Dia. Infeed
150mm (6")
Throughput
Up to 4 tonnes per hour
Feed method
Twin hydraulic feed rollers c/w Auto Feed Control
Blades
2 x 101mm (4") fully hardened
|
Pronar MPT 18/1g Stacker - Category: Recycler - Ex Demo Pronar MPT 18/1g Stacker - Category: Recycler
2020
748 hours
CAT Stage V, 36.4kW (50hp)
Loading Hopper with replaceable cladding
Ballast Weights
Cooling System Liquid
Scraper (under the top roller)
Feeder Support
|
For Hire Etesia Attila 98X - Category: Forestry Mulchers - For Hire Etesia Attila 98X - Category: Forestry MulchersEtesias Attila 98X ride-on brushcutter is reliable, efficient, comfortable and safe. The output, combined with 4-wheel-drive and performance make them a reference for professional use.Specification:Cutting Width: 98cmDimensions (L x W x H): 202 x 107 x 95 cmWeight: 310kgsEngine HP: 24HPTranmission: 4x4Hire charges 1 Day1502 Days1903 Days2401 Week2802 Weeks250 p/w4 Weeks200 p/w |
For Hire Mcconnel Robocut - Category: Forestry Mulchers - For Hire Mcconnel Robocut - Category: Forestry MulchersFor Hire Mcconnel Robocut - Category: Forestry Mulchers Robocut are compact versatile remote control bank mowers, capable of working on slopes up to 55 Degrees. Available with a flail head with either hammer or grass blades, they can provide safe working solutions to otherwise unworkable sites. With a working width of 1.3 Meters and a remote control range of over 100m you can operate the machine at a safe distance whilst still being in control. Max Gradient: 55 degrees Transmission: Hydrostatic
Machine weight: 1000kg
Fuel type: Diesel
Hire rates:
1 Week 700
2 Weeks 1350
3 Weeks 2000
4 Weeks 2500
4 Weeks or more POA |
Norcar Wheeled Miniloaders - Norcar wheeled miniloaders are robot welded using high quality materials to provide robust and durable loaders for all conditions year after year. The compact and strong construction of the lifting boom and front frame makes the machine stable and well balanced. A centered boom provides durability and unbeatable visibility. The telescopic boom broadens the usage area of the loader thanks to increased lifting height and range.
Norcar wheeled mini-loaders range from 750kg to 1300kg and the lifting height is from 2014mm to 3520 mm.
Norcar offer a wide variety of attachments for groundcare, forestry, agriculture property maintenance and construction.
For more information and pricing, please call Green Plant on 01483 235111. |
For Hire Forst ST6 - Category: Wood Chippers - For Hire Forst ST6 - Category: Wood ChippersProfessional site clearance contractors, arborists companies looking for a wood chipper that handles up to 150mm (6inch) with ease.Forst ST6 DFuel - DieselChipping capacity - 6"1 Day£2002 Days£2503 Days£3001 Week£3502 Weeks£325 p/w4 Weeks or morePOA |
Jo Beau B13-90 - Category: Stump Grinders - Jo Beau B13-90 - Category: Stump Grinders
Pedestrian grinder
Swivel Turntable
Honda 13 Hp petrol engine
Greenteeth
Weight 151 kg (332.89 Lbs)
Spare teeth |